Connect to FP-XH C30T

Configurator WD

1. Go to https://www3.panasonic.biz/ac/e/fasys/software_info/common/tol_configwd.jsp and download configurator_wd_v177.exe after registration and install it.

2. Open the Configurator WD software, click on the menu Option -> Select IP of PC -> Specify the IP address of PC, select the local IP address and click on the OK button.

3. Click on the menu Search -> Search BroadCast, the FP-X COM5 module will appear in the list.

4. Right click on the FP-X COM5 item in the list and select Setting IP Address in the pop-up menu to set a fixed IP address for the PLC device, then click OK.

5. Right click on the FP-X COM5 item in the list, select Communication Setting in the pop-up menu, set the Baud rate of COM1 to 115200 and click OK.

6. Right-click on the FP-X COM5 item in the list, select Communication Setting-> Option Setting in the pop-up menu, set Respons timeout to 1000 and click OK.

7. Open Control FPWIN Pro 7 and confirm that the Communication Speed of the PLC serial port COM1 is 115200.

Neuron Setting

1. Add a Panasonic Mewtocol device to the Neuron Southbound Device Manager. 2.

2. Change PLC IP Address to the target device IP address in the device configuration. 3.

3. Modify PLC Port to be the target device port in the device configuration. 4.

4. Change Unit Number to the target device unit number in the device configuration and submit the setup form.

Test Data List

Name	Address	Attribute	Data type
DATA1	DT0	Read Write	INT16
DATA2	DT2	Read Write	UINT16
DATA3	DT4	Read Write	INT32
DATA4	DT7	Read Write	UINT32
DATA5	DT10	Read Write	FLOAT
DATA6	DT13	Read Write	DOUBLE
DATA7	X0	Read	BIT
DATA8	Y0	Read Write	BIT
DATA9	DT20.0	Read	BIT
DATA10	DT17.20	Read Write	STRING