Panasonic mewtocol

The Mewtocol plug-in is used to access Panasonic's FP-XH, FP0H series PLCs via Ethernet.

Parameters

Parameter	Description
PLC IP Address	Target PLC IPv4 address
PLC Port	Target PLC IPv4 address, Default 2000
PLC Station	Target PLC station, Default 1

Data Types

• INT16
• UINT16
• INT32
• UINT32
• INT64
• UINT64
• FLOAT
• DOUBLE
• BIT
• STRING

Address format

AREA ADDRESS[.BIT][.LEN[H][L]]

.BIT

Only available for non-bit type area, means read the specified binary bit of the specified address, the binary bit index interval is [0, 15].

.LEN[H][L]

When the data type is string type, .LEN indicates the length of the string; you can optionally fill in H and L to indicate two byte orders, and the default is the byte order of H.

PLC Area

Area	DATA TYPE	ATTRIBUTE	REMARK
X	uint16、uint32、uint64、bit	read/write	External input
Y	uint16、uint32、uint64、bit	read/write	External output
R	uint16、uint32、uint64、bit	read/write	Internal relay
T	uint16、uint32、uint64、bit	read/write	Timer
C	uint16、uint32、uint64、bit	read/write	Counter
L	uint16、uint32、uint64、bit	read/write	Link relay
DT	all	read/write (bit type readonly)	Data register DT
LD	all	read/write (bit type readonly)	Link data register LD
FL	all	read/write (bit type readonly)	File register FL
S	--	--	Timer/counter set value area SV
K	--	--	Timer/counter elapsed value area EV
IX	all	read/write (bit type readonly)	Index register IX
IY	all	read/write (bit type readonly)	Index register IY
ID	all	read/write (bit type readonly)	Index register ID

Examples

Address	Data type	Description
X0	bit	X Area, Address 0
X1	bit	X Area, Address 1
Y0	bit	Y Area, Address 0
Y1	bit	Y Area, Address 1
DT100	int16	D Area, Address 100
DT1000	uint16	D Area, Address 1000
DT200	uint32	D Area, Address 200
DT10	float	D Area, Address 10
DT20	double	D Area, Address 20
DT20.0	bit	D Area, Address 20, 0 bit
DT20.2	bit	D Area, Address 20, 2 bit
DT1002.16L	string	D Area, Address 1002, String length 16, Byte order L
DT1003.16	string	D Area, Address 1003, String length 16, Byte order H