Connect to FX5U

PLC Setting

1. Open the GX Works3 PLC programming software and create a new project. Series Select FX5CPU,Type Select FX5U, Click OK.

2. Click Connection Destination -> Connection, Set Adapter and IP Address of Adapter, Click OK.

3. Click on the menu Online -> Read frome PLC -> Select All -> Execute.

4. Click Navigation -> Parameter -> FX5UCPU -> Module Parameter -> Ethernet Port, Check and confirm IP Address, Click External Device Configuration.

5. Drag Ethernet Device(General) -> SLMP Connection Module to list, Protocol select TCP and set Port No., Click Close with Reflecting the Setting.

6. Click on the menu Online -> Write to PLC -> Execute.

Neuron Setting

1. Add a Mitsubishi 3E device to Neuron Southbound Device Management.

2. Change the PLC IP Address to the target device IP address in the device configuration.

3. Modify PLC Port as the target device port in the device configuration and submit the setup form.

4. Add Group，Add test tag.

Test Data List

Name	Address	Attribute	Data Type
DATA1	D0	Read Write	INT16
DATA2	D1	Read Write	UINT16
DATA3	D2	Read Write	INT32
DATA4	D4	Read Write	UINT32
DATA5	D6	Read Write	FLOAT
DATA6	D8	Read Write	DOUBLE
DATA7	X0	Read	BIT
DATA8	Y0	Read Write	BIT
DATA9	D20.0	Read	BIT
DATA10	D100.16	Read Write	STRING