Mitsubishi 3E
The Mitsubishi 3E plug-in is used to access Mitsubishi's QnA-compatible PLCs, including the Q Series (MC), iQ-F Series (SLMP), and iQ-L Series, via Ethernet.
The Mitsubishi 3E is fully compatible with the Mitsubishi SLMP protocol.
Parameters
| Parameter | Description |
|---|---|
| PLC IP Address | Target PLC IPv4 address |
| PLC Port | Target PLC IPv4 address, Default 2000 |
Data types
- INT16
- UINT16
- INT32
- UINT32
- FLOAT
- DOUBLE
- BIT
- STRING
Address format
AREA ADDRESS[.BIT][.LEN[H][L]]
.BIT
Only available for non-bit type area, means read the specified binary bit of the specified address, the binary bit index interval is [0, 15].
.LEN[H][L]
When the data type is string type, .LEN indicates the length of the string; you can optionally fill in H and L to indicate two byte orders, and the default is the byte order of H.
PLC Area
| AREA | DATA TYPE | ATTRIBUTE | REMARK |
|---|---|---|---|
| X | bit | read/write | Input relay (Q/iQ-F) |
| DX | bit | read/write | (Q/iQ-F) |
| Y | bit | read/write | Output relay (Q/iQ-F) |
| DY | bit | read/write | (Q/iQ-F) |
| B | bit | read/write | Link relay (Q/iQ-F) |
| SB | bit | read/write | Link special relay |
| M | bit | read/write | Internal relay (Q/iQ-F) |
| SM | bit | read/write | Special relay (Q/iQ-F) |
| L | bit | read/write | Latch relay (Q/iQ-F) |
| F | bit | read/write | Annunciator (Q/iQ-F) |
| V | bit | read/write | Edge relay (Q/iQ-F) |
| S | bit | read/write | (Q/iQ-F) |
| TS | bit | read/write | Timer Contact (Q/iQ-F) |
| TC | bit | read/write | Timer Coil (Q/iQ-F) |
| SS | bit | read/write | (Q/iQ-F) |
| STS | bit | read/write | Retentive timer Contact (Q/iQ-F) |
| SC | bit | read/write | (Q/iQ-F) |
| CS | bit | read/write | Counter Contact (Q/iQ-F) |
| CC | bit | read/write | Counter Coil (Q/iQ-F) |
| TN | all | read/write | Timer Current value (Q/iQ-F) |
| STN | all | read/write | Retentive timer (Q/iQ-F) |
| SN | all | read/write | (Q/iQ-F) |
| CN | all | read/write | Counter Current value (Q/iQ-F) |
| D | all | read/write | Data register (Q/iQ-F) |
| DSH | -- | ||
| DSL | -- | ||
| SD | all | read/write | Specical register (Q/iQ-F) |
| W | all | read/write | Link register (Q/iQ-F) |
| WSH | -- | ||
| WSL | -- | ||
| SW | all | read/write | Link special register (Q/iQ-F) |
| R | all | read/write | File register (Q/iQ-F) |
| ZR | all | read/write | File register (Q/iQ-F) |
| RSH | -- | ||
| ZRSH | -- | ||
| RSL | -- | ||
| ZRSL | -- | ||
| Z | all | read/write | Index register (Q/iQ-F) |
Examples
| Address | Data type | Description |
|---|---|---|
| X0 | bit | X area，Address 0 |
| X1 | bit | X area，Address 1 |
| Y0 | bit | Y area，Address 0 |
| Y1 | bit | Y area，Address 1 |
| D100 | int16 | D area，Address 100 |
| D1000 | uint16 | D area，Address 1000 |
| D200 | uint32 | D area，Address 200 |
| D10 | float | D area，Address 10 |
| D20 | double | D area，Address 20 |
| D20.0 | bit | D area，Address 20，0 bit |
| D20.2 | bit | D area，Address 20，2 bit |
| D1002.16L | string | D area，Address 1002，String length 16，Endian L |
| D1003.16 | string | D area，Address 1003，String length 16，Endian H |